Hi all
Here is a 6mm Scifi build I did a couple of years ago and thought it was worth posting it here as i'm quite new around here (and if you haven't seen it elsewhere already).
Scifi settlement
The buildings will all be made from household crap I've been hoarding for a while along with bits of packaging and plasticard. I'll add details to them using spare 40K bits, Grendel radar dishes, pieces of sprue, brass tubing, plasticard and an old Star Wars AT-AT walker. I've got a spray can of pearl white which I will paint all the buildings with and detail them with a purple contrasting colour (maybe).
The layout is designed so the bases make a hex shaped settlement with one spare piece or I can split it into 2-3 smaller settlements. The roads are all triangle shaped plasticard pieces I had spare after making a bunch aircraft hex bases. The bases are 3mm MDF which I cut up and by hand (it was pretty tricky measuring these and cutting these so they fit together smoothly). I'll cut a small hex piece for the center and that will be a comms tower of some sort.
Housing bases
These are made from deodorant lids and a plastic bit that comes from a pizza! Obviously lots of details need to be added to disguise the original pieces. I'm short one lid so I need to go and buy another deodorant can...
Administration and hydroponic base
I'm using a couple of spare CNC boxes as a hydroponic greenhouse with a spare bit from the AT-AT walker. This will add a splash of green to the settlement.
The command base is a lid and some kinder egg pieces which I need to add lots of details to. The bit on top of the brown lid is a GW flying base.
Entrance and Launch pad
I mostly used bits from the star wars kit of these bases as the feet off the kit make perfect landing pads. The plan is to add a
fence around the base to stop the local wildlife getting into the base with a large gate at the entrance.
Cheers
Kieran
Yeah !! 
