Tactical Command
http://www.tacticalwargames.net/taccmd/

AT18 Project Workbench Reports
http://www.tacticalwargames.net/taccmd/viewtopic.php?f=179&t=33589
Page 1 of 2

Author:  schoon [ Tue Sep 04, 2018 5:04 pm ]
Post subject:  AT18 Project Workbench Reports

Motivated by this Dakka thread, I wanted a place where we can post progress on our collective AT workbenches.

I find it's motivating to see some of the ideas of others.

Motivated by some of the amazing buildings I'm seeing on the AT18 Facebook group, I put together a plan...

(SEE ATTACHMENT)

I have four of the the 40K Comm objectives for the tower tops, and I'm thinking of picking up a Marauder bomber to be crashed into the side of one of the towers...

Attachments:
Quad Tower.jpg
Quad Tower.jpg [ 229.76 KiB | Viewed 35800 times ]

Author:  GlynG [ Tue Sep 04, 2018 9:50 pm ]
Post subject:  Re: AT18 Project Workbench Reports

Dreadclaw crashed into the side of one could be a good look too? https://ttgamingdiary.files.wordpress.c ... g_3195.jpg

I was inspired to make some really huge terrain by stumbling across the Angelus Prime display board (it's like twenty foot high with 5.5k 40k models on it, craziness). Worth googling though some images of it for ideas.

Author:  schoon [ Sat Sep 08, 2018 12:36 am ]
Post subject:  Re: AT18 Project Workbench Reports

Finished the first of the 4 towers for this project.

Anyone know of a good place to get Mechanicus symbols, which I'd like to place on one tower facing?

I'm thinking of the one on the treads of the Galvanic Servo-Hauler - you can get them as bits...

Attachments:
Tower_WIP.JPG
Tower_WIP.JPG [ 479.72 KiB | Viewed 35692 times ]

Author:  schoon [ Mon Sep 10, 2018 11:38 pm ]
Post subject:  Re: AT18 Project Workbench Reports

Here's another progress pic.

With my "stunt" lower level door, you can see how the lowest level will span the entire building, the landing pad will be in the center on "level 2," and I'm still looking for a Marauder of Lightning figure to be crashed into the side of one of the towers...

Attachments:
tower_2.jpg
tower_2.jpg [ 85.99 KiB | Viewed 35616 times ]

Author:  jimmyzimms [ Tue Sep 11, 2018 11:10 am ]
Post subject:  Re: AT18 Project Workbench Reports

Crashed plane today of all days ;)

Author:  schoon [ Fri Sep 14, 2018 5:20 pm ]
Post subject:  Re: AT18 Project Workbench Reports

Getting closer!

Attachments:
tower_wip_2.JPG
tower_wip_2.JPG [ 210.45 KiB | Viewed 35524 times ]

Author:  schoon [ Fri Sep 28, 2018 12:00 am ]
Post subject:  Re: AT18 Project Workbench Reports

This is the final - or at least final before basing and painting - build for my Grand Master terrain.

I'm pretty happy with the Quad Tower building, intended to be a "centerpiece." and then used all the leftovers to build the other one.

Looking forward to getting them based on 1/8" styrene and add some flavor stuff, like small trees, shrubs, wrecks, etc.

Attachments:
Extras_Building_1__Done.JPG
Extras_Building_1__Done.JPG [ 86.91 KiB | Viewed 35396 times ]
Quad_Tower_Done.JPG
Quad_Tower_Done.JPG [ 189.66 KiB | Viewed 35396 times ]

Author:  NoisyAssassin [ Fri Sep 28, 2018 1:15 am ]
Post subject:  Re: AT18 Project Workbench Reports

That's looking pretty great!

Author:  jimmyzimms [ Fri Sep 28, 2018 11:18 am ]
Post subject:  Re: AT18 Project Workbench Reports

Yeah ditto. Great not boxes

Author:  schoon [ Tue Jan 08, 2019 10:40 pm ]
Post subject:  Re: AT18 Project Workbench Reports

Finally getting around to assembling my Warlord - which I'd been putting off till the weapon options I want became available.

I customized the head and cowl with knight parts.

Need to get my airbrush back in running condition next...

Attachments:
Titan_Progress.jpg
Titan_Progress.jpg [ 1.05 MiB | Viewed 34960 times ]

Author:  schoon [ Wed Jan 23, 2019 4:46 pm ]
Post subject:  Re: AT18 Project Workbench Reports

I 3D printed a "stained glass" piece for use with the Civitas Imperialis sets, and will be integrating it into the planned building below.

Statues will go on the lower level discs.

Just need to figure out what to use for the dome on top now...

Attachments:
Cathedral_Draft.png
Cathedral_Draft.png [ 44.68 KiB | Viewed 34836 times ]
Stained_Glass_2x2.jpg
Stained_Glass_2x2.jpg [ 324.08 KiB | Viewed 34836 times ]

Author:  elsmore01 [ Wed Jan 23, 2019 4:57 pm ]
Post subject:  Re: AT18 Project Workbench Reports

Looks good!

Maybe this would fit:
https://vanguardminiatures.co.uk/shop/d ... noris-set/

Author:  GlynG [ Wed Jan 23, 2019 4:57 pm ]
Post subject:  Re: AT18 Project Workbench Reports

schoon wrote:
Just need to figure out what to use for the dome on top now...



This? https://vanguardminiatures.co.uk/shop/d ... noris-set/

Author:  schoon [ Thu Jan 24, 2019 1:21 am ]
Post subject:  Re: AT18 Project Workbench Reports

Good call. Thanks, Gents.

Author:  schoon [ Fri Feb 08, 2019 8:52 pm ]
Post subject:  Re: AT18 Project Workbench Reports

My Ministorum building is coming along - need to add the dome to the top level and statues to the 4 corners of the 2nd level...

Attachments:
Ministorum_WIP.jpg
Ministorum_WIP.jpg [ 252.5 KiB | Viewed 34573 times ]

Page 1 of 2 All times are UTC [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/